865B for sale at Bingham Equipment Company, Arizona. Serving your new and used equipment needs from Mesa, Casa Grande, Yuma, Parker, Buckeye, Cottonwood, Tucson, Phoenix, Prescott Valley, Roll, and Lakeside, Arizona.
CASE 865B Motor Grader
Get the flexibility of both manual and automatic shifting to match the job conditions at hand with our powershift direct-drive transmission. Increased power, stability and turning performance to the moldboard are delivered through the A-frame and high-strength circle. And for unmatched ground-breaking power, our rear-ripper accommodates up to five teeth and front scarifier accommodates 11 teeth.
Move even more dirt with less horsepower and better fuel economy through a multi-radius involuted moldboard design.
Superior all-around visibility and a clear view of the moldboard are achieved with floor-to-ceiling cab glass. Operator comfort is provided by ergonomic, low-effort control levers positioned within easy reach.
Get easy access to the engine and perform daily maintenance checkpoints with the friendly flip-up hood. And reaching the fill port or grease zerks is simple with ground-level access including our exclusive fuel fill with lockable cap.
|Emission Rating||Tier 3|
|Engine make / model||Case|
|Net Power - hp (kW)||205 (153)|
|Rated rpm - rpm||2200|
|Gross Power - hp (kW)||220 (164)|
|No. of Cylinders||6|
|Displacement - Inches³ (ltr)||409 (6.7)|
|Peak Engine Torque - lbf / ft (Nm)||686 (930)|
|Speed Range - Forward||8|
|Wheelbase - ft/in (mm)||20 ft 5 in (6219)|
|Blade Base (blade to frt wheel) - ft/in (mm)||8 ft 5 in (2562)|
|Overall Length - ft/in (mm)||28 ft (8534)|
|Overall Height w/cab - ft/in (mm)||10 ft 11 in (3340)|
|Clearance Under Front Axle - inches (mm)||14.9 (380)|
|Bank Cut Angle - ± °||90|
|Shoulder Reach Outside Wheels - Right - ft/in (mm)||not published|
|Shoulder Reach Outside Wheels - Left - ft/in (mm)||not published|
|Blade Lift Above Ground - inches (mm)||17.5 (445)|
|Blade Pitch Operation - Adjustment Fwd - °||42|
|Blade Pitch Operation - Adjustment Rear - °||87|
|Blade Side Shift Right - inches (mm)||27 (686)|
|Blade Side Shift Left - inches (mm)||20.9 (533)|
|Circle Rotation - °||360|
|Circle Diameter - inches (mm)||68.9 (1752)|
|Standard moldboard length - ft/in (mm)||13 ft (3962)|
|Moldboard height - inches (mm)||23.6 (600)|
|Fuel Tank - gallons (US) (ltr)||90 (341)|
|Hydraulic Reservoir - gallons (US) (ltr)||23.7 (90)|
|SAE Operating Weight - lbs (kg)||33796 (15330)|
|Weight on Front Wheels - lbs (kg)||12129 (5505)|
|Weight on Tandem Wheels - lbs (kg)||23864 (10824)|
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.