Discbine® 310/312 Center-Pivot Disc Mower-Conditioners

HIGH PRODUCTIVITY. VERSATILE OPERATION. EASY TO OWN.
Center-pivot Discbine® 310 and 312 disc mower-conditioners mow cleanly and maneuver quickly to speed up your hay and forage making. They offer productive 10’ 4’’ and 11’ 6’’ cutting widths, simple maintenance and a modest 80- and 87-PTO-horsepower requirement that makes them easy to own.

TIME-SAVING MANEUVERABILITY
The productive center-pivot design lets you lay down long continuous swaths that save time throughout the haymaking process. By alternating from left to right on each pass, you improve your efficiency from cutting and through baling or harvesting. The Discbine 310 and 312 are at home in large fields as well as small or oddly shaped ones. The standard swivel gearbox hitch allows turns greater than 90° while the PTO angle remains virtually unchanged to practically eliminate driveline chatter and wear through the tightest turns. Transport width is no wider than the cutting width for easy movement between farm and field.

FAST, SMOOTH CUTTING
You cut every bit of crop when you choose a Discbine® 310 or 312 disc mower-conditioner. The new low-profile disc cutterbar gets all the crop and leaves clean, good-looking mown fields. Shallow working angle also means crop flows smoothly over the cutterbar into the conditioner for even conditioning. The high-capacity counter-rotating discs move crop rearward, out of the knife path and into the conditioner.

READY FOR ANY CROP
Whether you’re mowing alfalfa, clover, orchard grass, timothy, bermuda grass, bahia, grass, fescue, cereal rye, forage wheat or oats, a Discbine 310 or 312 mower-conditioners make quick work of mowing and preparing your crop for baling or chopping.

CONDITIONING SYSTEMS FOR FAST DRYING
You’ll produce nutritious, high-value feed with your choice of two conditioning systems—the gentle conditioning of rubber chevron-intermeshing rolls that save delicate leaves, or the Y-tine flail system for fast drying of grass hay. Both conditioning systems cover 85% of the working width for high capacity, and produce well-formed, fast-drying windrows and wide swaths.

EASY SWITCH FROM SWATH TO WINDROW
All Discbine models feature fast and easy windrow shield and swath gate adjustments, without tools, so you can quickly adjust to crop and moisture conditions and your harvesting method. Spread the cut crop in a fast-drying swath or into a tight, three-foot-wide windrow that’s ready to bale or chop.

• 

  Discbine® 310 (Steel)

• 

  Discbine® 310 (Chevron Rubber)

• 

  Discbine® 312 (Steel)

• 

  Discbine® 312 (Chevron Rubber)