STIHL MS 151 T C-E

• dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

• Purge Pump Primer
  The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.
  

• Side-Access Chain Tensioner
  The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.

• Top handle (T)
  The top-handle model is specially designed for in-tree professional use only!

• STIHL OILOMATIC^® Saw Chain.
  STIHL makes its own saw chain.

• STIHL Quickstop^®
  STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
  

• Master Control Lever™
  The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.

• More Power, Reduced Emissions
  Provides excellent power with low exhaust emissions.

• Lightweight (Lightest in STIHL range)
  Lightest saw in the STIHL range.

• Maneuverability
  A lightweight saw consider that it’s easy to maneuver.

• Ease of Use with Less Fatigue
  The lightweight and easy-to-use MS 151 T C-E minimizes fatigue, allowing users to work longer and get more done.

STIHL recommends 3670 005 0064 (71PM364) OILOMATIC® saw chain and 12” 3005 008 3405 STIHL ROLLOMATIC® E MINI guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.